Reference profile
- Designation
- ISO 21940-11
- Title
- Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour
- Issuing body
- ISO
- Current edition
- [verify]
- Status
- Library record: published; official standard status [verify].
- Category
- Acoustics & Vibration
1
Overview
Specifies balance tolerances, the necessary number of correction planes, and methods for verifying the residual unbalance for rotors with rigid behaviour.
2
Scope & Applicability
Covers
- Balance Quality Grades (G)
- Permissible Residual Unbalance
- Correction Planes
Does NOT cover (exclusions)
- Exclusions are not documented in this library record. Confirm the official publication, neighbouring codes, the adopted edition, and jurisdictional boundaries before application.
3
Key Requirements
Lifecycle requirements
- Rotor Balancing
- Manufacturing
- Repair
4
Technical Details
Specifies balance tolerances, the necessary number of correction planes, and methods for verifying the residual unbalance for rotors with rigid behaviour.
Components: Pump Impeller, Fan Rotor, Motor Armature.
Where to find it in the codeRefer to the official table of contents and the sections cited by the project specification; section numbering can vary by edition.
5
Engineering Notes
- This standard replaced the well-known ISO 1940-1 (Balance quality grades like G6.3, G2.5).
6
Related Standards
- ISO 1940-1 (Withdrawn)
Companion or referenced standard; verify its exact relationship in the adopted edition.
7
Source, Edition & Status
- Publisher
- ISO
- Edition Year
- N/A
- Industries
- General Industry, Petrochemical, Power
- Content Status
- published
- Last Reviewed
- 2026-07-01
- Last Updated
- 2026-07-01
- Verified By
- Engineering Reviewer
- Official Link
- N/A
This paraphrased summary is a discovery aid. Do not reproduce or substitute it for the copyrighted official publication or jurisdictional requirements.