Reference profile
- Designation
- ASME RTP-1
- Title
- Reinforced Thermoset Plastic Corrosion-Resistant Equipment
- Issuing body
- ASME
- Current edition
- [verify]
- Status
- Library record: published; official standard status [verify].
- Category
- Static Equipment
1
Overview
Applies to stationary vessels used for the storage, accumulation, or processing of corrosive or other substances at pressures not exceeding 15 psig external and/or 15 psig internal above any hydrostatic head.
2
Scope & Applicability
Covers
- FRP Materials
- Design by Rules
- Design by Stress Analysis
- Fabrication
- Inspection
Does NOT cover (exclusions)
- Exclusions are not documented in this library record. Confirm the official publication, neighbouring codes, the adopted edition, and jurisdictional boundaries before application.
3
Key Requirements
Lifecycle requirements
- FRP Tank Design
- Chemical Storage
- Scrubber Design
4
Technical Details
Applies to stationary vessels used for the storage, accumulation, or processing of corrosive or other substances at pressures not exceeding 15 psig external and/or 15 psig internal above any hydrostatic head.
Components: FRP Tank, FRP Vessel, Scrubber.
Where to find it in the codeRefer to the official table of contents and the sections cited by the project specification; section numbering can vary by edition.
5
Engineering Notes
- The go-to standard for low-pressure fiberglass (FRP) tanks and vessels.
6
Related Standards
- ASME BPVC X
Companion or referenced standard; verify its exact relationship in the adopted edition.
7
Source, Edition & Status
- Publisher
- ASME
- Edition Year
- N/A
- Industries
- Chemical, Petrochemical, Utility, General Industry
- Content Status
- published
- Last Reviewed
- 2026-07-01
- Last Updated
- 2026-07-01
- Verified By
- Engineering Reviewer
- Official Link
- N/A
This paraphrased summary is a discovery aid. Do not reproduce or substitute it for the copyrighted official publication or jurisdictional requirements.